Why measuring comes before setup
The Custom Fit Auto Close HearthGate (G3111) is built to fit standard 6-foot hearths and most grills, and its custom fit is meant to adapt to your specific doorway or hearth dimensions. That makes a few careful measurements the most useful preparation you can do. You are not just buying a gate; you are matching a barrier to the shape of the hot zone in your home.
Measure before you order or unbox, so you know whether the gate's extra-wide design covers the opening you have and where the door section should sit. The supplied information does not list a minimum or maximum adjustable width, so treat your own measurements as the deciding evidence rather than assuming a range.
What to measure around your fireplace or grill
Record each measurement in the same units and sketch a simple plan view. The goal is a clear picture of the protected zone, not a perfect architectural drawing.
- Width across the front: Measure the full span you want the gate to stand across, from the leftmost point of the hearth or grill area to the rightmost. Note any side walls, trim or furniture that narrow the usable line.
- Depth from front to back: Measure how far the hearth or grill zone extends away from the wall. This tells you how much floor space the gate layout needs to enclose.
- Height of the hot surfaces: Note the height of the firebox opening, grill lid or any hot surface the gate is meant to keep children away from. The supplied record does not state a gate height, so use this to judge coverage, not to calculate a fit.
- Door location and walking path: Mark where people naturally approach the fireplace or grill. The G3111 allows the door section to be placed anywhere in the layout, so choose the spot that keeps daily access convenient without crossing the hot zone.
- Obstacles along the floor line: Check for hearth stones, gas starter keys, sharp edges, hard corners and dirty logs. The gate is designed to help protect against these, but the floor line still needs to be clear enough for the gate to sit as intended.
What the G3111 is designed to cover
- Custom Fit Auto Close HearthGate (G3111): Fits standard 6-foot hearths and most grills. This is the baseline sizing claim in the supplied record. Measure your own hearth or grill against it before assuming the gate is the right scale for your space.

Custom Fit Auto Close HearthGate (G3111) - Custom Fit Auto Close HearthGate (G3111): Custom fit helps adapt to your specific doorway or hearth dimensions. Your measurements are the input for that custom fit. The more accurately you record width and depth, the better you can judge whether the gate will enclose the area you need.
- Custom Fit Auto Close HearthGate (G3111): Extra-wide design to cover larger openings. If your fireplace or grill zone is wider than a standard doorway, this is the feature that makes the G3111 worth considering over a narrower gate.
- Custom Fit Auto Close HearthGate (G3111): The door section can be placed anywhere in the layout. This lets you align the door with your walking path, which is why measuring access points matters as much as measuring the opening itself.
Turning measurements into a gate layout
Once you have width, depth and access points, sketch the gate as a rectangle or U-shape around the hot zone. Place the door on the side you approach from most often, and check that the gate line does not block a needed walkway or trap a gas starter key where it cannot be reached.
The supplied record does not include preparation or operating instructions for the G3111, so this layout step is planning, not installation guidance. If your measurements show the gate would sit unevenly, cross a doorway, or leave a gap at a corner, those are reasons to reconsider the placement before setup rather than force a fit.
Checkpoints before you commit
Run through these checks with your measurements in hand. They are based on the supplied product facts, not on a manufacturer installation sequence.
- Does the opening match the 6-foot hearth baseline?: The G3111 is designed for standard 6-foot hearths and most grills. If your opening is much wider or much narrower, confirm the fit before relying on the gate.
- Is the door where you will actually use it?: Because the door section can go anywhere in the layout, pick the position that matches your daily path and keeps the hot zone enclosed.
- Are the hazards you measured the ones the gate addresses?: The supplied record names hot surfaces, flames, gas starter keys, sharp edges, hard corners and dirty logs. If your main concern is something else, the gate may not be the right solution.
- Have you accounted for the auto-close feature?: The gate has an auto-close feature for added convenience. Leave enough clear space for the door to swing and close without catching on furniture or hearth tools.
What the supplied information does not settle
The record does not give a specific adjustable width range, a gate height, or detailed installation steps. It also does not confirm compatibility with every fireplace or grill shape. That is not a reason to guess; it is a reason to measure carefully and treat your own dimensions as the deciding factor.
If your hearth is an unusual size or shape, use the measurements you have recorded to ask whether the custom fit is likely to work before you buy. The G3111 is a practical extra-wide barrier for standard hearths and most grills, but the fit still depends on the space you actually have.


